I want to run a tile processing plant. What kind of equipment do I need?
Answer: there are three necessary machines for ceramic tile processing plant.
1。BT-1200 TYPE 14 HEADS ARC EDGE GRINDING POLISHING MACHINE
2.BT-1000 THPE FULLY AUTOMATIC CONTINOUSLY FRONT & BACK SIDES CUTTING MACHINE
3.BT-1200 type manual ceramic tile cutting machine
Here are the functions and characteristics of the following three machines.
1. ARC EDGE GRINDING POLISHING MACHINE (ten heads, fourteen heads)
The arc polishing machine is mainly used in grinding straight edge, grinding round edge, inverted 45 degree angle, opening and preventing sliding groove, cascade brick and foot line. It can process any grade of polished brick and stone to become beautiful ladder brick and foot line brick. The production process is fully automatic, easy to operate, can adjust the speed of the production line at will, can adjust the size of the arc surface at will, also can be polished 45 degrees of the slope, the width of the machining can be stepless in 100mm-1200mm, the size of the arc can be adjusted at will.
2. FULLY AUTOMATIC CONTINOUSLY FRONT & BACK SIDES CUTTING MACHINE (front & back double sets blades , front & back three sets blades).
Double sets blades of this machine, the first knife head pre cut and the second knife cut off, processed the products to achieve precise results
This machine is a new generation of cutting equipment developed by our company ,according to the market demand. It is characterized by the use of automatic control baffle and digital control. When you need to cut different sizes of tiles, as long as you enter the required size numbers on the control panel, the baffle will automatically adjust to the required position, the processed product is accurate in size and cutting speed. Fast, high accuracy and low cost are the first choice for ceramic tile deep processing industry.
3。BT-1200 type ceramic tile cutting machine( 800(1200)TYPE SIMPLES CUTTING MACHINE or 800(1200) TYPE MULTIFUNCTION CUTTING MACHINE)
4. The things to be prepared by the ceramic tile processing plant:
100-500 square meters of plant, 380V voltage, 30-50 kilowatts of electricity, 1 pools (15-20 cubic), 1 air compressors, 8 kilograms of pressure from 2.2Kw, 1 1.5Kw of water pump, and copper wire for 16 square.
Total power: about 30-50Kw
The power is about 25 degrees per hour, and the processing cost is about 0.1-0.2 yuan.
Processing fee collection:
The cutting cost is 1 yuan for one cut or 600 size brick cost 0.6 yuan, and the 800 size brick cost 0.8 yuan.
About the 45 degree chamfering,some some places is 2 yuan for 1 meter and some places is 2.5 yuan or 3 yuan, or even higher
About The grinding circle some places is 1。5 yuan 1 meter and some places is 2 yuan or 3 yuan or even higher。
The opening and preventing grooves are calculated by 1 meters and 0.5 yuan each.
Because the processing fee of each place is different, and how to charge specifically, we must make an accurate quotation according to the local situation.